Alvin's replacement
New Sphere in Exploring the Abyss
Excerpt:
The darkness is matched by the intense pressure. Four miles down, it amounts to nearly five tons per square inch. That is too much even for Alvin, the most famous of the world’s tiny submersibles, which can take a pilot and two scientists down to a maximum depth of 2.8 miles.
But a new submersible is being built here, and even the process of construction seems a rebuke to the darkness. The work lighted up a cavernous factory with fireworks on a recent visit. Hot reds and oranges burst into showers of spark and flame as blistering metal began to yield to the demands of the submersible’s design.
“Amazing,” Tom Furman, a senior engineer at Ladish Forging, said after a big press bore down on an 11-foot disk of hot metal, making the delicate manipulation look as easy as rearranging a gargantuan pat of butter.
The new vehicle is to replace Alvin, which was the first submersible to illuminate the rusting hulk of the Titanic and the first to carry scientists down to discover the bizarre ecosystems of tube worms and other strange creatures that thrive in icy darkness.
The United States used to have several submersibles — tiny submarines that dive extraordinarily deep. Alvin is the only one left, and after more than four decades of probing the sea’s depths it is to be retired. Its replacement, costing some $50 million, is to go deeper, move faster, stay down longer, cut the dark better, carry more scientific gear and maybe — just maybe — open a new era of exploration.
Its architects at the Woods Hole Oceanographic Institution on Cape Cod describe it as “the most capable deep-sea research vehicle in the world.”
Alvin can transport a pilot and two scientists down 2.8 miles, providing access to 62 percent of the dark seabed. The new vehicle is expected to descend more than four miles, opening 99 percent of the ocean floor to inquiry. But the greater depth means that the vehicle’s personnel sphere and its many other systems will face added tons of crushing pressure.
“Technologically, it’s quite challenging,” Robert S. Detrick Jr., a senior scientist and vice president for marine facilities and operations at Woods Hole, said of forging the new personnel sphere. “It’s also something that hasn’t been done for a long time in the United States.”
To better resist the sea’s pressure, the wall of the new personnel sphere is to be nearly three inches thick, up from Alvin’s two inches. Deep explorers always use spheres to make crew compartments because that geometry best resists the crushing force.
Comment: More on Alvin. My own personal "deep" was scuba diving in Gun Lake Michigan. I think I went to down to 90'. There was a Haam's beer can in the mud! (Really).
I believe Alvin was created by General Mills.
ReplyDelete